Hi,  
 
I have several telephones as above (JR 168) and I'm looking for informations about how to make them work with a sip-voip account.
 
I found your review here http://linuxslate.com/Review-AstrohogIPPhone.html#links and I was so happy but... the administration panel you show is NOT like mine. I have no sip-protocol choice and settings... may be it depends by the firmware? Currently I have Ipolex 1.49
 
Can you please send me any firmware file you have, or suggestions on how to make them work?
 
Thank you in advance,
 
Diego

Diego;
 
There are 2 possibilities:
 
1.  As far as I remember, there are 2 passwords for these devices.  The one with a 4 digit PIN is a "user" password, and the other, with usually a longer PIN, is an administrative password.  I am not saying that this is the case, since the page you sent shows the IP settings, but it is possible that there is an administrative UID/PW that would reveal the rest of the panels.
 
2.  You have a special FW that is hard coded to a certain, possibly proprietary protocol.  If this is the case, you will need to flash a new FW, such as the 1.42 FW I mention in the review.
 
I see that the links to the F/W files are now dead.  I have several versions around someplace.  I'll look for them.

I can't find 'on the web' a version 1.42... you are the 'last chance'.
When you have 2 minutes, please check on your hard disks ; )
My email is principe(dot)del(dot)lago(at)gmail(dot)com  
Tks