Linuxslate.com Forums

New firmware versoin 3.7.6 is available on the GUOHETEC Download Page I am aware that a firmware version 3.7.6 was posted to the GUOHETEC Download Page a couple of weeks ago. However, a newer radio has been occupying my metal bandwidth, and as a result, I missed this firmware for the Q900 until now...

Note: This Post is specific to the Bruce Firmaware. This does not apply to Meshtastic. Note: This is based on the current release version of Bruce 1.14 So now that Bruce is working with the CC1101 Module on my LilyGo T-LoRa Pager, what does it do? Can it really be used to steal cars? --- Well, I th...

UPDATE: Due to the HelTec V4 Battery Management Issues (Lack of Battery Management) as described in the Post #3 of this thread, my HelTec V4, which was installed 30 ft up a pine tree, did not survive it's first night. It has not reappeared on my WiFi network since then despite several days of good ...

RadTel RT-950 PRO Bluetooth Programming App In my previous post, I complained about some people unfairly (in my opinion) criticizing this radio. Now that I said that -- I am going to proceed to criticize the Bluetooth App. In my case, this is the Android version. (Note: All Android Phones and Table...

Linuxslate.com Review of the RadTel RT-950 PRO and how to Upgrade from Linux True first impressions after owning this radio for less than 2 hours: From what I have seen so far, I am very impressed with the RadTel RT-950 PRO. I have seen some negative comments in some Ham Radio Forums, and I DO NOT ...

Adding 433MHz support to the LR1121 Version of the LilyGo T-Lora Pager NOTE: What is here is for using the Bruce Firmware. This does not apply to use with Meshtastic. As mentioned, My original intent when shopping for the LilyGo T-Lora Pager was for use as an RF Exportation Tool. To this end, I hav...

Hardware: My first (of many) Hardware disappointments: HelTec V4: As mentioned, the HelTec V4 was purchased so that I could learn Meshtastic in the weeks before my LilyGo T-LoRa Pager arrived, and to act as an outdoor repeater or "range extender" for the Pager, which was rumored to have r...

User Interface and Configuration: So once I got the correct release firmware installed on my HelTec V4, I needed to configure it. I would have thought that it would provide an SSID providing DHCP and a Webserver. Just connect, supply my WiFi information, reconnect, and navigate to the web interface...

Meshtastic?! More like Meshtragic! -- My Adventures with Meshtastic and the HelTec V4 and LilyGo T-LoRa Pager The idea of Meshtastic: Metastatic is an open source community mesh communications system. The idea is to provide communications without traditional infrastructure such as phone lines or mo...

UPDATE: While it seems that the DOLCOM GP328 PLUS is no longer sold, and is not even mentioned anyplace else on the Internet, it seems to be the same as the HamGeek HG-8800. The HamGeek also seems to be discontinued, however some still seem to be available on a "popular action site", and ...